The Auspicious AZ-1307 is a micro limit switch with a top plunger push actuator. The plunger sits flat on top of the body, so a cam, door edge or moving part presses straight down onto it. No lever, no roller, nothing sticking out that can be knocked out of line.

That simplicity is the reason to pick it. Where the moving part comes down square onto the switch every cycle, a plain plunger is the most compact and precise option available. Detection starts at 0.01mm of travel, so it will pick up very small, slow movement that a lever actuator would miss. It also fits where nothing else will, since the actuator adds almost no height to the body.

At 15A on 125 or 250V AC it carries three times the current of a typical 5A micro switch, and the quarter horsepower rating lets it drive a small motor directly instead of through a contactor. IP55 protection covers dust and low pressure water, which suits indoor machine and workshop conditions. UL and CE approvals cover it for export machinery.

Key Features

Top plunger push actuator presses straight down with no overhang
Compact body fits where lever type switches cannot
Fine detection from 0.01mm of plunger travel
High 15A rating at both 125V and 250V AC
Quarter HP motor switching at 250V AC
IP55 protection against dust and low pressure water
UL Listed and CE Mark certified
Genuine Auspicious product made in Taiwan

Technical Specifications

Specification	Detail
Product Type	Micro Limit Switch
Range of Product	AZ Series
Model	AZ-1307
Actuator	Top Plunger, Push Type
AC Rating	15A at 125V or 250V AC
Motor Rating	1/4 HP at 250V AC
DC Rating	1/4A at 250V DC
Operating Speed	0.01mm to 1m per second
Degree of Protection	IP55
Certification	UL Listed, CE Mark
Brand	Auspicious
Country of Origin	Taiwan
SKU	AZ-1307

Common Applications

Door and cover position detection, cam operated sequencing on machine tools, jig and fixture confirmation, vending and dispensing mechanisms, press and slide end stops, small motor switching without a contactor, and any tight space where a lever or roller would not fit.

Choosing the Right Limit Switch Actuator

The actuator has to suit how the moving part arrives. A plain plunger is right when the contact comes straight down and repeats accurately. If a cam slides across the actuator instead of pressing onto it, choose the roller plunger limit switch AM-1308, which shares the same 15A rating but adds a roller so the cam does not wear the plunger head.

Where the part approaches from the side, a lever reaches out to meet it. The lever limit switch AZ-7120 is a compact side mount option, the adjustable roller lever limit switch AZ-8108 lets you set the lever length, and the adjustable rod limit switch AZ-8107 gives long reach onto irregular targets. For contact from any direction, the spring limit switch AZ-8166 flexes instead of breaking. For heavy equipment such as lifts and cranes, the big wheel limit switch AZ-5108L is IP67 rated with a wide contact face.

Browse the full 15 amp micro switch range or the wider limit and micro switches category.

Why Buy From Qahraba

Qahraba supplies electrical contractors, panel builders and machine builders across the UAE and worldwide. Every micro limit switch we stock is genuine Auspicious product with full certification. Local UAE orders ship within 1 to 2 working days, free above AED 250, or collect free from our Dubai store. Call or WhatsApp +971 52 913 9543 for bulk pricing.

FAQ,s

What is a top plunger push type micro limit switch?

It is a position detection switch where the actuator is a plunger on top of the body. A moving part presses straight down on it, the contacts change over, and the controller gets the signal.

When should I use a plain plunger instead of a roller?

Use a plain plunger when the part presses straight down in the same spot each cycle. If a cam slides across the actuator, use a roller so it rolls rather than scrapes.

Can it switch a motor directly?

Yes, up to a quarter horsepower at 250V AC. Anything larger should go through a contactor with the switch driving the coil.

How small a movement will it detect?

Operation starts at 0.01mm of plunger travel, so it picks up very fine and slow movement as well as faster travel up to 1m per second.

Is IP55 enough for my application?

IP55 resists dust and low pressure water, which covers most indoor machine and workshop use. For washdown, coolant or outdoor conditions choose an IP65 or IP67 rated model.

Does this switch come with a catalog?

Yes, the full micro switch catalog is linked above with dimensions and contact data.

Top Plunger Push Type Micro Limit Switch 15A IP55 AZ-1307 Auspicious