Daily Analog Timer 230V DIN Rail 16A 114120 Hugo Muller

The Hugo Muller 114120 is a daily analog timer that switches a circuit on and off at the same times every day. You set the program by pushing the segments on the dial, so anyone can read the schedule at a glance and change it without a manual or a keypad.

It takes just 17.5mm of DIN rail, which is one module, so it fits into a board where a wider timer would mean reorganising the row. The setting keys are captive, meaning they stay attached to the dial and cannot be dropped inside the panel or lost during a site visit.

A manual override switch sits on the front with three positions: permanent off, automatic and permanent on. That lets an electrician force the load on or off for testing or maintenance without touching the programmed segments. The built in power reserve holds the clock for around 100 hours after a supply failure, so a short outage does not reset the schedule.

The quartz time base keeps accuracy within one second per day, and the 16A contact handles 2000W of filament or halogen lighting directly. Hugo Muller builds these in Germany to DIN EN 60730 standards.

Key Features

• Daily program repeating the same schedule every 24 hours

• Slim 17.5mm format taking a single DIN rail module

• Captive setting keys that cannot fall into the panel

• Manual override switch for permanent off, automatic or permanent on

• Approximately 100 hours of power reserve after supply failure

• Quartz accuracy within one second per day

• Easy to read dial showing the full switching program

• Made in Germany by Hugo Muller

Technical Specifications

Common Applications

Corridor and common area lighting on a fixed daily schedule, shop signage and window display lighting, car park and compound lighting, irrigation and pump cycles, ventilation and extraction fans, water heaters on off peak hours, and any load that should run at the same times each day without someone switching it by hand.

Related Timers and Switches

Choosing a timer comes down to how the schedule repeats and what decides the switching. If the program needs to change by day of the week, the weekly programmable timer 170410 gives separate weekday and weekend settings from the same Hugo Muller range. See the full daily and weekly timer range for other options in both formats.

For outdoor lighting, a fixed clock time drifts out of step with sunset through the year. An astronomical timer calculates sunrise and sunset from the date and location, while a twilight switch uses a light sensor to switch on actual darkness.

Where the load needs a fixed run time after a trigger rather than a clock schedule, look at countdown relay timers, multi range timers for panel control circuits, or a staircase timer or light dimmer for lighting that switches off automatically after each use.

Browse the full digital and analog timers category for the complete range.

Why Buy From Qahraba

Qahraba supplies electrical contractors, panel builders and procurement engineers across the UAE and worldwide. Every Hugo Muller timer we stock is genuine German manufactured product. Local UAE orders ship within 1 to 2 working days, free above AED 250, or collect free from our Dubai store. Call or WhatsApp +971 52 913 9543 for bulk pricing.

FAQ,s

What does a daily analog timer do?

It switches a circuit on and off at set times, and repeats the same schedule every 24 hours. You set it by pushing segments on a rotating dial rather than programming through a screen.

How long does the power reserve last?

Around 100 hours at normal room temperature. If the supply fails, the clock keeps running for roughly four days, so the schedule is still correct when power returns.

What is the shortest schedule I can set?

The minimum switching interval is 15 minutes, so each on or off segment covers a quarter hour block.

What load can the 16A contact handle?

16A resistive at 250V, which is 2000W of filament or halogen lighting. For LED or CFL lighting at 230V the limit is 200W, and for inductive loads the rating drops to 2.5A.

How much space does it need in the board?

It is 17.5mm wide, which is a single DIN rail module, and clips onto standard 35mm rail.

Can I switch the load on manually?

Yes. The front switch has three positions: permanent off, automatic and permanent on, so you can override the program without changing the segment settings.