Push Button Limit Switch with Cable 2M 1NO 1NC AZ-4111

The Auspicious AZ-4111 is a push button limit switch supplied with a 2 metre cable already fitted. A moving part presses the plunger head straight down, the contacts change over, and the signal runs back along the cable to the panel. There is no terminal chamber to open, no gland to fit and no conduit run to the switch itself.

That pre wired design is the main reason to choose it. On a standard limit switch you have to open the body, land the conductors on terminals and seal the entry correctly, and a poorly fitted gland is where water usually gets in. Here the cable exits a factory sealed body, so the IP67 rating holds in the field exactly as it does on paper. For machines where the switch sits in an awkward spot or gets moved around during commissioning, it saves a lot of time.

IP67 means fully dust tight with protection against temporary immersion, so it suits outdoor equipment, washdown areas and sites exposed to rain. The COM NO NC arrangement gives one normally open and one normally closed contact from three cores, enough for a position signal and an interlock. Ratings are AC15 5A at 250V AC for inductive control loads and DC12 5A at 30V DC for resistive DC, which covers contactor coils and PLC inputs.

Key Features

• Supplied with a 2 metre cable already fitted and sealed

• No terminal box, gland or conduit work needed at the switch

• Push plunger actuator for straight line contact

• COM NO NC connection giving one NO and one NC contact

• IP67 sealing rated for dust and temporary immersion

• AC15 5A at 250V AC for inductive control loads

• DC12 5A at 30V DC for resistive DC circuits

• Genuine Auspicious product manufactured in Taiwan

Technical Specifications

Common Applications

Position detection on machines where running conduit to the switch is impractical, outdoor gates and barriers, washdown areas in food and beverage plants, mobile and skid mounted equipment, temporary installations and test rigs, door and guard closed confirmation, and any point where a sealed, ready to wire switch saves installation time.

Choosing the Right Limit Switch

The actuator decides the model, and it depends on how the moving part arrives. A push plunger suits straight in line contact. Where a cam slides across the head repeatedly, a roller stops the wear: the roller plunger limit switch AM-1308 handles that at 15A, and the cross roller plunger limit switch ME-8122 accepts approach from more than one side.

If the part comes from the side rather than head on, the lever limit switch AZ-7120 reaches out to meet it, and the adjustable roller lever limit switch AZ-8108 lets you set the lever length. For contact from any direction or where an overrun could snap a rigid actuator, the spring limit switch AZ-8166 flexes instead of breaking. On heavy equipment such as lifts and cranes, the big wheel limit switch AZ-5108L and the ball limit switch AZ-5109 both carry 10A with IP67 bodies.

Where no physical contact is wanted at all, see the proximity and photo sensors range, which is also supplied pre wired. Browse the full 5 amp mini limit switch range or the wider limit and micro switches category.

Why Buy From Qahraba

Qahraba supplies electrical contractors, panel builders and machine builders across the UAE and worldwide. Every limit switch we stock is genuine Auspicious product. Local UAE orders ship within 1 to 2 working days, free above AED 250, or collect free from our Dubai store. Call or WhatsApp +971 52 913 9543 for bulk pricing or alternative cable lengths.

FAQ,s

What is a push button limit switch?

It is a limit switch operated by a plunger head that is pressed straight down by a moving part. The plunger movement changes the contacts over, signalling the controller that the part has reached position.

Why choose a version with a cable already fitted?

Because it removes the field wiring at the switch. No terminal chamber to open, no gland to seal and no conduit run, which saves installation time and removes the most common cause of water ingress.

What does COM NO NC mean?

The cable carries three cores: a common, a normally open contact and a normally closed contact. It gives you both a position signal and an interlock from one switch.

What does IP67 mean here?

The body is fully dust tight and withstands temporary immersion in water, so it suits outdoor installations, washdown areas and equipment exposed to rain.

What do the AC15 and DC12 ratings mean?

AC15 is the utilisation category for switching AC electromagnetic loads such as contactor coils. DC12 covers resistive DC loads like PLC inputs. Both are rated 5A here.

Can I get a longer cable?

The standard version comes with 2 metres. Contact us on +971 52 913 9543 to check availability of other lengths before ordering.