On Off Twin Timer Analog 1s to 300h 24 240V ET2-41 Anly

The Anly ET2-41 is an analog twin timer, also known as an asymmetrical recycler. It runs a repeating on and off cycle where each stage has its own setting, so the load can be on for one period and off for a completely different one. A standard single setting timer cannot do this, which is why a twin timer is specified wherever the two stages need different durations.

Ten selectable ranges cover everything from one second up to 300 hours, so the same unit suits fast pulsing on a packaging line and slow cycling on a pump or an extraction fan. Two knobs on the front set the on and off periods directly, with no menu or programming to work through. For panels that are maintained by site staff rather than engineers, that matters.

It accepts 24 to 240V AC or DC on a single input, which removes the need to match a timer to the panel’s control voltage before ordering. The output contact is rated 250VAC 5A, enough to drive a contactor coil directly. The compact 22.5mm wide body fits a standard DIN rail or panel cutout without crowding the layout, and the unit is made in Taiwan by Anly Electronics.

Key Features

• Independent on and off timing from a single unit

• Ten selectable ranges covering 1s to 300h

• Wide 24 to 240V AC DC input suits most control voltages

• 250VAC 5A contact drives a contactor coil directly

• Fast 0.1s maximum reset time

• Low 3VA power consumption

• Slim 22.5mm wide body saves panel space

• Simple knob setting with no programming required

Technical Specifications

Common Applications

Intermittent pump and fan cycling, lubrication systems that run briefly then pause, agitator and mixer duty cycles, flashing beacons and warning signals, conveyor indexing, extraction and ventilation on a timed cycle, and any load that needs a different run time to rest time.

Related Timers

If the panel needs a digital display and exact setpoints instead of knobs, the AH5CN-T digital twin timer runs the same on off cycle with an 8 pin base and 100 to 240V AC DC input. For a lower cost analog option on a fixed AC supply, the ATDV-NC multi range analog twin timer covers 110 to 240V AC with a 1C output contact.

See the full twin timer range for all on off cycle models, or the digital and analog timers category for other timing functions. If the application only needs a single delay rather than a repeating cycle, look at the multi range timers, and for motor starting duty see the star delta timers.

Why Buy From Qahraba

Qahraba supplies electrical contractors, panel builders and procurement engineers across the UAE and worldwide. Local UAE orders ship within 1 to 2 working days, or collect from our Dubai store. Call or WhatsApp +971 52 913 9543 for bulk pricing or technical help.

FAQ,s

What is a twin timer?

A twin timer runs a repeating on off cycle where the on period and the off period are set separately. It is also called an asymmetrical recycler because the two stages do not have to be equal.

How is it different from a normal cycle timer?

A standard recycler uses one setting for both stages, so the load is on and off for the same length of time. A twin timer gives each stage its own control, which is what most real applications need.

What time ranges does the ET2-41 cover?

Ten ranges in total, from 1 second up to 300 hours, selectable on the unit.

Can it run on 24V DC?

Yes. The input accepts 24 to 240V on either AC or DC, so the same unit works across most control voltages without ordering a different version.

Can it switch a contactor directly?

Yes. The contact is rated 250VAC 5A, which covers standard contactor coils. Larger loads should be switched through a contactor rather than from the timer contact.

How much panel space does it need?

The body measures 22.5mm wide, 56.6mm deep and 90.6mm high.