Multi Range Analog Twin Timer ATDV-NC Anly Taiwan

The Anly ATDV-NC is a Multi Range Analog Twin Timer that controls both the ON time and the OFF time of a cycle from one unit. Two separate dials let you set each stage independently, so the output repeats on and off for as long as the timer stays powered. A single range timer cannot do this without a second device and extra wiring.

Four selectable ranges cover 6 seconds, 60 seconds, 6 minutes and 60 minutes. That spread means one part number handles short pulse work and long cycle work alike, so panel builders can stock one model instead of several. Setting is done on the face of the unit with no programming, which matters on sites where a technician has to adjust timing without a manual.

The timer takes AC 110 to 220V at 50 or 60Hz and switches a 1C output rated 250VAC 5A on resistive load. It mounts on the surface through a standard 8 pin round base, so it drops straight into existing sockets. Reset is fast at a maximum of 0.2 seconds, and power draw sits at roughly 2VA.

Key Features

• Twin dial setting controls ON time and OFF time separately

• Four selectable ranges from 6 seconds up to 60 minutes

• ON OFF repeat cycle function without a second timer

• 1C output contact rated 250VAC 5A on resistive load

• Standard 8 pin round base for quick socket mounting

• Fast reset at a maximum of 0.2 seconds

• Low 2VA power consumption

• Genuine Anly unit manufactured in Taiwan

Technical Specifications

Common Applications

Repeat cycle control on pumps and dosing equipment, intermittent mixer and agitator operation, conveyor index and pause sequences, flashing beacon and alarm circuits, periodic flushing and purge cycles, intermittent fan and ventilation control, and any process that needs a fixed run period followed by a fixed rest period.

Related Timers

The right twin timer depends on supply voltage, setting method and range. If your panel runs on a wider supply, the ET2-41 analog twin timer accepts 24 to 240V AC or DC and extends the range up to 300 hours. Where the setting needs to be exact and repeatable rather than dial set, the AH5CN-T digital twin timer gives a digital display on the same 8 pin base.

Compare all three in the twin timer collection. For single stage delay work see the multi range timer range, and for motor starting applications the star delta timer range. Sockets and bases are listed under timer accessories. The full digital and analog timers category covers every timer type we stock.

Why Buy From Qahraba

Qahraba supplies electrical contractors, panel builders and procurement engineers across the UAE and worldwide. Every timer we stock is genuine Anly product from Taiwan. Local UAE orders ship within 1 to 2 working days, or collect from our Dubai store. Call or WhatsApp +971 52 913 9543 for bulk pricing or technical help.

FAQ,s

What is a twin timer?

A twin timer controls two timing stages from one unit. You set the ON time on one dial and the OFF time on another, and the output repeats that cycle for as long as the timer has power.

What does multi range mean on this timer?

It means the timer has four selectable time ranges rather than one fixed range. The ATDV-NC covers 6 seconds, 60 seconds, 6 minutes and 60 minutes, so one unit suits both short and long cycles.

Does the ATDV-NC need a separate base?

Yes. It uses a standard 8 pin round base, which mounts on the surface and takes the field wiring. Check our timer accessories for the matching socket.

What load can the output switch?

The 1C output is rated 250VAC 5A on resistive load. For motors, contactor coils or other inductive loads, use the timer to drive a contactor rather than switching the load directly.

Can the ON and OFF times be set differently?

Yes, that is the point of a twin timer. Each stage has its own setting, so you can run a short ON period with a long OFF period or the other way round.

Is this an analog or digital timer?

Analog. Timing is set with dials on the face of the unit, which suits sites where a technician needs to adjust it quickly without programming. For a digital display, the AH5CN-T is the equivalent.